AMAgriMasterClass
← All courses

Milking robot on a family dairy farm – a VMS in Adam Heród's old barn

Instructor: Adam Heród★ 5.0 (1)

Milking robot on a family farm – will it work in an old barn

Many family farms face the same choice: a new milking parlour or a robot in the existing building. Adam Heród put a DeLaval robot where his old parlour used to be, in a barn built on a slope. Competitors said the space was too tight. Today one VMS V300 milks about 70 cows, and the farmer is no longer tied to milking at 5 in the morning and 5 in the evening.

What you will learn

  • How to fit a milking robot into an old barn in place of a parlour
  • Cows per robot: usually 50–70, most often 60–70
  • How a sort gate directs cow traffic and saves robot time
  • How to read the milking queue, alarm colours and the MDI index in DelPro
  • What quarter milking and diverting abnormal milk to the drain give you
  • How the robot feeds concentrate and glycerol only to cows that eat
  • What the VMS V300 changes: a camera with no teat mapping and faster attachment

Who this course is for

  • Farmers with 50–70 cows choosing between a robot and a parlour
  • Farms upgrading an old barn without putting up a new building
  • Families preparing to hand the farm to the next generation
  • Older farmers who worry about working with a computer

About the farm in the course

Adam Heród farms in Lipnica Dolna, inside the Wiśnicz-Lipnica Landscape Park in hilly southern Poland. He keeps 130–140 cattle, including 60–70 cows yielding about 9,500 kg per lactation. He started his first VMS Classic robot in 2013. In 2021, after handing the farm to his daughter, he replaced it with a VMS V300.

The second lesson answers farmers' questions: training nervous heifers, mash feed in the robot, water use, service and the rules of a landscape park. This is a free online video course that you watch at your own pace. You get a certificate after completing the lessons, and you can ask questions under each lesson. Start with the visit to Adam's barn.

What you will learn

  • ✓Fit a milking robot into an old barn in place of the parlour
  • ✓Match cow numbers to the robot: usually 50–70, most often 60–70
  • ✓Direct cow traffic with a sort gate so the robot does not lose time
  • ✓Read the milking queue, alarm colours and the MDI index in DelPro
  • ✓Set a daily routine: fetching cows, phone alarms, checking quarters
  • ✓Feed concentrate and glycerol in the robot only to cows that eat

Frequently asked questions

Who is this course for?+

For dairy farmers choosing between a robot and a parlour, upgrading an old barn or preparing to hand the farm to a successor.

Can a milking robot go into an old barn?+

The course shows a DeLaval VMS installed where the old parlour stood, in an existing barn on a slope, with no extension.

How many cows can one robot milk?+

According to DeLaval, most farms run 50–70 cows per robot, most often 60–70. Adam Heród milks about 70 cows with one robot.

Does the course cost anything?+

No, the course is free. You get unlimited access and watch the lessons at your own pace.

Will I get a certificate?+

Yes. You receive a certificate after completing all lessons.

Can I ask the instructors questions?+

Yes, you can ask in the Q&A section under each lesson.

Curriculum

Module 1: A milking robot on a family farm
  • ▶VMS V300 milking robot in an old barn – Adam Heród's farm🔒
  • ▶Questions and answers: a milking robot on a small dairy farm🔒

Student reviews★ 5.0 (1)

  • ★★★★★Martyna3/17/2023

    Polecam

You may also like